if [ ! "$_GEOM_SUBR" ]; then _GEOM_SUBR=1
#
# Copyright (c) 2012-2014 Devin Teske
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in the
#    documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.
#
# $FreeBSD$
#
############################################################ INCLUDES

BSDCFG_SHARE="/usr/share/bsdconfig"
. $BSDCFG_SHARE/common.subr || exit 1
f_dprintf "%s: loading includes..." geom.subr
f_include $BSDCFG_SHARE/strings.subr
f_include $BSDCFG_SHARE/struct.subr

############################################################ GLOBALS

NGEOM_CLASSES=0 # Set by f_geom_get_all()/f_geom_reset()

#
# GEOM classes for use with f_geom_find()
#
# NB: Since $GEOM_CLASS_ANY is the NULL string, make sure you quote it whenever
#     you put arguments after it.
#
setvar GEOM_CLASS_ANY		"any"
setvar GEOM_CLASS_DEV		"DEV"
setvar GEOM_CLASS_DISK		"DISK"
setvar GEOM_CLASS_ELI		"ELI"
setvar GEOM_CLASS_FD		"FD"
setvar GEOM_CLASS_LABEL		"LABEL"
setvar GEOM_CLASS_MD		"MD"
setvar GEOM_CLASS_NOP		"NOP"
setvar GEOM_CLASS_PART		"PART"
setvar GEOM_CLASS_RAID		"RAID"
setvar GEOM_CLASS_SWAP		"SWAP"
setvar GEOM_CLASS_VFS		"VFS"
setvar GEOM_CLASS_ZFS_VDEV	"ZFS::VDEV"
setvar GEOM_CLASS_ZFS_ZVOL	"ZFS::ZVOL"

#
# GEOM structure definitions
#
f_struct_define GEOM_CLASS \
	id name ngeoms
f_struct_define GEOM_GEOM \
	id class_ref config name nconsumers nproviders rank
	# Also consumerN where N is 1 through nconsumers
	# Also providerN where N is 1 through nproviders
f_struct_define GEOM_CONSUMER \
	id geom_ref config mode provider_ref
f_struct_define GEOM_PROVIDER \
	id geom_ref config mode name mediasize

# The config property of GEOM_GEOM struct is defined as this
f_struct_define GEOM_GEOM_CONFIG \
	entries first fwheads fwsectors last modified scheme state

# The config property of GEOM_PROVIDER struct is defined as this
f_struct_define GEOM_PROVIDER_CONFIG \
	descr file fwheads fwsectors ident length type unit

#
# Default behavior is to call f_geom_get_all() automatically when loaded.
#
: ${GEOM_SELF_SCAN_ALL=1}

############################################################ FUNCTIONS

# f_geom_get_all
#
# Parse sysctl(8) `kern.geom.confxml' data into a series of structs. GEOM
# classes are at the top of the hierarchy and are stored as numbered structs
# from 1 to $NGEOM_CLASSES (set by this function) named `geom_class_C'. GEOM
# objects within each class are stored as numbered structs from 1 to `ngeoms'
# (a property of the GEOM class struct) named `geom_class_C_geom_N' (where C
# is the class number and N is the geom number).
#
# Use the function f_geom_find() to get a list of geoms (execute without
# arguments) or find specific geoms by class or name.
#
f_geom_get_all()
{
	eval "$( sysctl -n kern.geom.confxml | awk '
	BEGIN {
		struct_count["class"] = 0
		struct_count["geom"] = 0
		struct_count["consumer"] = 0
		struct_count["provider"] = 0
	}
	############################################### FUNCTIONS
	function set_value(prop, value)
	{
		if (!struct_stack[cur_struct]) return
		printf "%s set %s \"%s\"\n",
			struct_stack[cur_struct], prop, value
	}
	function create(type, id)
	{
		if (struct = created[type "_" id])
			print "f_struct_free", struct
		else {
			struct = struct_stack[cur_struct]
			struct = struct ( struct ? "" : "geom" )
			struct = struct "_" type "_" ++struct_count[type]
			created[type "_" id] = struct
		}
		print "debug= f_struct_new GEOM_" toupper(type), struct
		cur_struct++
		struct_stack[cur_struct] = struct
		type_stack[cur_struct] = type
		set_value("id", id)
	}
	function create_config()
	{
		struct = struct_stack[cur_struct]
		struct = struct ( struct ? "" : "geom" )
		struct = struct "_config"
		set_value("config", struct)
		type = type_stack[cur_struct]
		print "debug= f_struct_new GEOM_" toupper(type) "_CONFIG", \
		      struct
		cur_struct++
		struct_stack[cur_struct] = struct
		type_stack[cur_struct] = type "_config"
	}
	function extract_attr(field, attr)
	{
		if (match(field, attr "=\"0x[[:xdigit:]]+\"")) {
			len = length(attr)
			return substr($2, len + 3, RLENGTH - len - 3)
		}
	}
	function extract_data(type)
	{
		data = $0
		sub("^[[:space:]]*<" type ">", "", data)
		sub("</" type ">.*$", "", data)
		return data
	}
	############################################### OPENING PATTERNS
	$1 == "<mesh>" { mesh = 1 }
	$1 ~ /^<(class|geom)$/ && mesh {
		prop = substr($1, 2)
		if ((ref = extract_attr($2, "ref")) != "")
			set_value(prop "_ref", ref)
		else if ((id = extract_attr($2, "id")) != "")
			create(prop, id)
	}
	$1 ~ /^<(consumer|provider)$/ && mesh {
		prop = substr($1, 2)
		if ((ref = extract_attr($2, "ref")) != "")
			set_value(prop "_ref", ref)
		else if ((id = extract_attr($2, "id")) != "") {
			create(prop, id)
			cur_struct--
			propn = struct_count[prop]
			set_value(prop propn, struct_stack[cur_struct+1])
			cur_struct++
		}
	}
	$1 == "<config>" && mesh { create_config() }
	############################################### PROPERTIES
	$1 ~ /^<[[:alnum:]]+>/ {
		prop = $1
		sub(/^</, "", prop); sub(/>.*/, "", prop)
		set_value(prop, extract_data(prop))
	}
	############################################### CLOSING PATTERNS
	$1 ~ "^</(consumer|provider|config)>$" { cur_struct-- }
	$1 == "</geom>" {
		set_value("nconsumers", struct_count["consumer"])
		set_value("nproviders", struct_count["provider"])
		cur_struct--
		struct_count["consumer"] = 0
		struct_count["provider"] = 0
	}
	$1 == "</class>" {
		set_value("ngeoms", struct_count["geom"])
		cur_struct--
		struct_count["consumer"] = 0
		struct_count["provider"] = 0
		struct_count["geom"] = 0
	}
	$1 == "</mesh>" {
		printf "NGEOM_CLASSES=%u\n", struct_count["class"]
		delete struct_count
		mesh = 0
	}' )"
}

# f_geom_reset
#
# Reset the registered GEOM chain.
#
f_geom_reset()
{
	local classn=1 class ngeoms geomn geom
	while [ $classn -le ${NGEOM_CLASSES:-0} ]; do
		class=geom_class_$classn
		$class get ngeoms ngeoms
		geomn=1
		while [ $geomn -le $ngeoms ]; do
			f_struct_free ${class}_geom_$geomn
			geomn=$(( $geomn + 1 ))
		done
		classn=$(( $classn + 1 ))
	done
	NGEOM_CLASSES=0
}

# f_geom_rescan
#
# Rescan all GEOMs - convenience function.
#
f_geom_rescan()
{
	f_geom_reset
	f_geom_get_all
}

# f_geom_find $name [$type [$var_to_set]]
#
# Find one or more registered GEOMs by name, type, or both. Returns a space-
# separated list of GEOMs matching the search criterion. The $type argument
# should be the GEOM class (see $GEOM_CLASS_* variables in GLOBALS above).
#
# If $var_to_set is missing or NULL, the GEOM name(s) are printed to standard
# out for capturing in a sub-shell (which is less-recommended because of
# performance degredation; for example, when called in a loop).
#
f_geom_find()
{
	local __name="$1" __type="${2:-$GEOM_CLASS_ANY}" __var_to_set="$3"
	local __classn=1 __class __class_name __ngeoms
	local __geomn __geom __geom_name __found=
	while [ $__classn -le ${NGEOM_CLASSES:-0} ]; do
		__class=geom_class_$__classn
		$__class get name __class_name
		if [ "$__type" != "$GEOM_CLASS_ANY" -a \
		     "$__type" != "$__class_name" ]
		then
			__classn=$(( $__classn + 1 ))
			continue
		fi

		__geomn=1
		$__class get ngeoms __ngeoms || __ngeoms=0
		while [ $__geomn -le $__ngeoms ]; do
			__geom=${__class}_geom_$__geomn
			$__geom get name __geom_name
			[ "$__name" = "$__geom_name" -o ! "$__name" ] &&
				__found="$__found $__geom"
			__geomn=$(( $__geomn + 1 ))
		done
		__classn=$(( $__classn + 1 ))
	done
	if [ "$__var_to_set" ]; then
		setvar "$__var_to_set" "${__found# }"
	else
		echo $__found
	fi
	[ "$__found" ] # Return status
}

# f_geom_find_by $prop $find [$type [$var_to_set]]
#
# Find GEOM-related struct where $prop of the struct is equal to $find. Returns
# NULL or the name of the first GEOM struct to match. The $type argument should
# be one of the following:
#
# 	NULL		Find any of the below
# 	class		Find GEOM_CLASS struct
# 	geom		Find GEOM_GEOM struct
# 	consumer	Find GEOM_CONSUMER struct
# 	provider	Find GEOM_PROVIDER struct
#
# The $prop argument can be any property of the given type of struct. Some
# properties are common to all types (such as id) so the $type argument is
# optional (allowing you to return any struct whose property matches $find).
#
# If $var_to_set is missing or NULL, the GEOM struct name is printed to
# standard out for capturing in a sub-shell (which is less-recommended because
# of performance degredation; for example when called in a loop).
#
f_geom_find_by()
{
	local __prop="$1" __find="$2" __type="$3" __var_to_set="$4"
	local __classn=1 __class __ngeoms
	local __geomn __geom __nitems
	local __itype __itemn __item
	local __value __found=

	if [ ! "$__prop" ]; then
		[ "$__var_to_set" ] && setvar "$__var_to_set" ""
		return $FAILURE
	fi

	case "$__type" in
	"") : OK ;;
	class|GEOM_CLASS) __type=class ;;
	geom|GEOM_GEOM) __type=geom ;;
	consumer|GEOM_CONSUMER) __type=consumer ;;
	provider|GEOM_PROVIDER) __type=provider ;;
	*)
		[ "$__var_to_set" ] && setvar "$__var_to_set" ""
		return $FAILURE
	esac

	while [ $__classn -le ${NGEOM_CLASSES:-0} ]; do
		__class=geom_class_$__classn

		if [ "${__type:-class}" = "class" ]; then
			$__class get "$__prop" __value || __value=
			[ "$__value" = "$__find" ] && __found="$__class" break
			[ "$__type" ] && __classn=$(( $__classn + 1 )) continue
		fi

		__geomn=1
		$__class get ngeoms __ngeoms || __ngeoms=0
		while [ $__geomn -le $__ngeoms ]; do
			__geom=${__class}_geom_$__geomn

			if [ "${__type:-geom}" = "geom" ]; then
				$__geom get "$__prop" __value || __value=
				[ "$__value" = "$__find" ] &&
					__found="$__geom" break
				[ "$__type" ] &&
					__geomn=$(( $__geomn + 1 )) continue
			fi

			for __itype in ${__type:-consumer provider}; do
				$__geom get n${__itype}s __nitems || continue
				__itemn=1
				while [ $__itemn -le $__nitems ]; do
					__item=${__geom}_${__itype}_$__itemn

					$__item get "$__prop" __value ||
						__value=
					[ "$__value" = "$__find" ] &&
						__found="$__item" break
					__itemn=$(( $__itemn + 1 ))
				done
				[ "$__found" ] && break
			done
			[ "$__found" ] && break
			__geomn=$(( $__geomn + 1 ))
		done
		[ "$__found" ] && break
		__classn=$(( $__classn + 1 ))
	done
	if [ "$__var_to_set" ]; then
		setvar "$__var_to_set" "$__found"
	else
		[ "$__found" ] && echo "$__found"
	fi
	[ "$__found" ] # Return status
}

# f_geom_parent $geom|$consumer|$provider|$config [$var_to_set]
#
# Get the GEOM class associated with one of $geom, $consumer, $provider or
# $config.
#
# If $var_to_set is missing or NULL, the GEOM class name is printed to standard
# out for capturing in a sub-shell (which is less-recommended because of
# performance degredation; for example when called in a loop).
#
f_geom_parent()
{
	local __struct="$1" __var_to_set="$2"
	# NB: Order of pattern matches below is important
	case "$__struct" in
	*_config*) __struct="${__struct%_config*}" ;;
	*_consumer_*) __struct="${__struct%_consumer_[0-9]*}" ;;
	*_provider_*) __struct="${__struct%_provider_[0-9]*}" ;;
	*_geom_*) __struct="${__struct%_geom_[0-9]*}" ;;
	*) __struct=
	esac
	if [ "$__var_to_set" ]; then
		setvar "$__var_to_set" "$__struct"
	else
		echo "$__struct"
	fi
	f_struct "$__struct" # Return status
}

############################################################ MAIN

#
# Parse GEOM configuration unless requested otherwise
#
f_dprintf "%s: GEOM_SELF_SCAN_ALL=[%s]" geom.subr "$GEOM_SELF_SCAN_ALL"
case "$GEOM_SELF_SCAN_ALL" in
""|0|[Nn][Oo]|[Oo][Ff][Ff]|[Ff][Aa][Ll][Ss][Ee]) : do nothing ;;
*)
	f_geom_get_all
	if [ "$debug" ]; then
		debug= f_geom_find "" "$GEOM_CLASS_ANY" geoms
		f_count ngeoms $geoms
		f_dprintf "%s: Initialized %u geom devices in %u classes." \
		          geom.subr "$ngeoms" "$NGEOM_CLASSES"
		unset geoms ngeoms
	fi
esac

f_dprintf "%s: Successfully loaded." geom.subr

fi # ! $_GEOM_SUBR